The Garage7 Tie rod Conversion Kits for Nissan's have been put together to avoid rack spacers, whilst also upgrading to 14mm thick rack ends for extra strength,

Sizes are listed from the tip of the rack end thread to the very end of the tie rod

R31 Owners: TRW is stamped on the casting at the column, KYB will be on the body of the rack visible under the car

Spare parts are available, please use the 'Contact Us' page.

Suggested Vehicles this could suit:

M16x1.0 M16.1.5
HR31 Skyline (JDM & AUS with KYB rack) R31 Skyline (AUS with TRW rack)
- 380mm HR31 LCA, S13 Knuckles - 380mm R31 LCA, S13 Knuckles
- 390mm S13 LCA, S13 knuckles - 392mm S13 LCA, S13 knuckles
- 400mm S13 LCA, Modified Knuckles - 405mm S13 LCA, Modified Knuckles
- 420mm S14/R33 LCA, S13 Knuckles - 420mm S14/R33 LCA, S13 Knuckles
- 425mm S14/R33 LCA, Modified Knuckles - 425mm S14/R33 LCA, Modified Knuckles
S13 180sx (SR20 - Some, Check) - 450mm Extended LCA, Modified Knuckles
S14 200SX 910 Bluebird
S14 Silvia S12 Gazelle
S15 200SX S12 Silvia
S15 Silvia S13 Silvia (CA18)
R32 Skyline GTS-T S13 180SX (CA18)
- 380mm Standard R32 gear S13 Silvia (SR20)
- 390mm R32 with S14/R33 LCA S13 180SX (SR20 - some, check)
R32 Skyline GTS-4  
R32 Skyline GTR  
R33 Skyline GTS-t/GTS25  
R33 Skyline GTS-4  
R33 Skyline GTR  
R34 Skyline GTT  
R34 Skyline GTR  
A31 Cefiro  
Z31 Fairlady  
Z31 300ZX  
S12 Silvia  




SKU 75279
Brand Garage 7

Others Also Bought